Tips For Making Laser Engraving

If you are in need of fast engraving services and you have zero skills at it, we warmly recommend you get in touch with us and we will make sure to provide you with the fast, high quality engraving you need. We can cut and engrave just the way you need us to, and we will do it at affordable prices so you can enjoy a fully satisfying experience. If you are interested in learning how to engrave with the help of lase on your own, these next few tips should come in handy.

Protect The Surface Using Tape

The procedure is also referred to as “masking” by specialists and it is required in case you plan to engrave on an object with edges that can be easily stained by the smoke. To prevent this, use tape to cover the surface and make sure the masking tape will not affect the power of the laser. You are recommended to bump up the power if you feel it is necessary and make sure the masking tape will accurately protect the material around the engraving; run the engraving, then peal the tape off.

Use A Laser With Preset Values

For the most accurate and effective results, you should use a laser that has pre-set settings for cutting or engraving various materials with different levels of thicknesses. Another option is to simply load these settings into a laser or computer and have them saved in the form of presets. For this, use relevant names that will allow you to quickly identify them when needed. If you are getting ready to land a job as a laser engraver or you are just interested in learning the process as a hobby, we advise you to let your important projects in the hands of experts like us, and focus on your hobby in your spare time. For those of you who wish to land a job in the field, we recommend reading the Zigo Jobs blog and get the latest tips and advice on how to land a job in your desire field. You will fnd out hwo to write the most compelling resuem and cover leter for landing the ideal job you wish to apply for, and know how put the Zigo job search site to its best use. The variety and great diversity of all of the jobs listed there will help you find learn which are the requirements for a job as a laser engraver or for working in any other field you might be interested in.

Test All The Cuts Before Making Them

Despite of the fact that you might have chosen to use preset measures for cutting certain materials, it is best to first run a test cut before you complete your job. All you need to do is create small circles about 1/4" wide and cut out in scrap material. Finally, figure out whether you should increase or decrease the power and then get ready to turn your final cut.

Leave a Reply

Your email address will not be published. Required fields are marked *